Piecing border strips on the diagonal

So often, to save fabric expense, we purchase our border fabric intending to piece strips.  I find myself doing this more often now that I’ve learned how to do it successfully.

What does “successfully” mean?  To me that means the end border strip lies flat and square, without bulk in the seams, or waves along it’s path.  It’s not hard to do, but you have to pay attention to detail to attain results (but then what doesn’t that apply to?).

I thought I’d share with you, my readers, my method for piecing border strips on the diagonal.  I am sure it is not the only method, and if you are right handed,  you may need to work in the opposite direction, as I am left-handed and my instructions will be left-handed.  Yes, I can wield a rotary cutter right-handed, but I can’t hold a marking tool right-handed!

The first thing you must do is to press your fabric before you start.  If you wish to use sizing or starch to add some stiffness to your fabric (this is on the diagonal) you can, but these photos were taken on fabric that has been pre-washed and has not had sizing added to it.

After you press your fabric, cut your strips.  For this quilt, I wanted a 4″ finished border, so I cut 4-1′2″ strips.  Note, I did not cut them to exact length, but full WOF (width of fabric) cuts.  I will cut the pieced border down to size when I am ready to apply it to the quilt.  This tutorial is only on piecing the strips.

Your next step is to align the fabric strips RST (right sides together).  To do this, I use the markings on my cutting mat to place my strips at perfectly square alignment.  (this is really important, if your strips are not exactly perpendicular to each other, your border WILL have a wave in it).

Notice, both horizontally and vertically the fabric strips are aligned along inch markings on my mat.

I then PIN these pieces together.  I have found that by putting pins in all 4 sides the fabric doesn’t shift when I am either marking it or stitching on it.

I do put my pins with the heads in the corners I will not be stitching by.  That keeps me from accidentally running over a pinhead while I am stitching. (not that I’d ever do that, but sometimes…………)

I then use my ruler to mark my stitching line.

Align the ruler on the diagonal, lining up the corners.  Use the 45degree line on your ruler to make sure you have a 45degree diagonal stitching line.  This is also extremely important, if your stitching line isn’t 45 degrees, you will be adding excess fabric to your border, making it either wave or full and not flat.

I use an air-erasable marker to mark my stitch line along the ruler’s edge:

Now we will move to the sewing machine to sew our diagonal seam.  When I am sewing the diagonal seam, I align my needle with the side of the line that was ALONG THE RULER EDGE.  I do not sew in the center of the line, but along the edge of the line.

My stitching line, notice my pins have not yet been removed.  My stitching line is on the diagonal and doesn’t wobble.

Next I trim my seam allowance to 1/4″, removing the pins before I cut.

At this point, I like to trim off the dog ears on my corners.

Open your border and press your seam allowance:

Notice how you have no bulk, or dog-ears in the seam allowance:

If you follow these steps, your diagonally pieced borders will lie straight and square, and flat.  Cutting them to length is another post, for another day.

These steps don’t take long to do, it took me longer to write this tutorial than it took to make all 4 of my borders this morning while taking pics of each step.  And I promise you, if you take the time to line up, pin, mark and sew, you will be happy with your border strips.

Black Friday

Today, Black Friday, will not be spent shopping.  Although I’d like to say my holiday shopping is done, I’d be lying….. I’ve not even started yet.  But I just don’t understand, in the height of flue season, when our natural immunity is low, to subject ourselves to crowds and crowds of people, all hoping to get that elusive (and in limited quantity) deal of a savings.

Hmmm, anti-American?   Probably not, just realistic…….. so what will I spend my Black Friday doing?    Why quilting of course!!!!!  I’m still working on the next applique custom in the line-up.  It would have been done, but I totally admit to taking Thanksgiving off and spending it with the DH.

Although I didn’t spend the entire day away from fabric…… that is so hard for me to do….. I did get  a start on this piece:

Isn’t that pretty?   That’s from a pattern by Vickie Clontz called “Way Back Home”, and is the center section only.  You can find the pattern here on her website.  Vickie works in wool felts, which I don’t.  But I hand-dye fabrics for sale at local shows, and decided to make this sample in my hand-dyes, with her pattern.   It seemed a natural to do as we’ll both be vending at the “Quilting and Needlearts Extravaganza”  on January 29 and 30th in Statesville NC.  For a complete list of vendors, click here

Okay, off to the studio for a bit while DH is outside working on the landscape and before Little Bear has his post-op checkup at the vets.

However you spend your Black Friday, enjoy the day, and every moment of it……. I will, I’ll be in the studio!

Friday night recap

It’s been a full week of custom quilting here.   That means not many quilts, but lots of quilting time spent.  First I finished the compass quilt, but wasn’t able to get great pictures of it.

Full quilt:

(pics are clickable)

And a detail pic of one corner:

I finished the table runner for the guild for Habitat for Humanity.  Here’s the front:

And here’s the quilting showing on the back:

I quilted an applique quilt for another customer, again custom:

Yes, until I find my camera bag with the part for my tripod, my picture taking skills are sorely lacking!  But here’s a detail shot taken while the quilt was still on the machine:

Part of the week was spent piecing and quilting a class sample, which I’ll reveal next week after it’s bound.  And the week ended with my doing a custom background fill quilt.  This will be a sample quilt showcasing different types of background fills:

In tomorrow’s post I’ll show the individual blocks, this post is picture heavy enough for now.

Have a great weekend!